Termékek ablakos telepítés becsült (88)

38', 32' and 28'' It is a decorative looking sliding door and window joinery system without thermal insulation. Alternative case profile options are available.

SG 50K is a thermally insulated silicone facade system with a section depth of 50 mm. Vertical profiles with depths to meet different static values ​​are available in the system. Thanks to the condensate channel in the vertical profiles, facade water is easily discharged. In this system, air and water impermeability is maximized and application problems are eliminated. The hidden wing allows application with or without nails. Visible Internal Part:50 mm Visible External Part:16 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

Saray Aluminum Composite Panels are a colored aluminum composite plate with a white polyethylene core in the middle, covered with aluminum plate on two sides. Saray Aluminum Composite Panels offer unlimited opportunities for architects and designers to create creative and original buildings. Saray Aluminum Composite Panels can be easily applied on exterior and interior facades. It is a preferred coating material all over the world with its lightness, durability, flexibility, smooth surfaces and supporting feature of other building elements.

It's getting ready.

It stands out with its molding system that can be applied on wall thicknesses from 85 mm to 270 mm. It can be applied to interior doors with wooden and aluminum joinery. System Depth (Mulleted door frame):71.6 mm System Depth (Mullet):66 mm Applicable Wooden Door Thickness:40 mm

It is a carrier carcass system on which ceramic material can be mounted. It is advantageous in terms of stock costs because it consists of a small number of profiles and accessories. These systems are generally described as ventilated facade cladding, and the substructures to be used in these systems must be resistant to corrosion. For this reason, the carrier system and its accessories, consisting entirely of aluminum profile and stainless steel, make the SS 54 system advantageous.

The space-saving feature of sliding in the interior and the high performance feature of the window are combined. The high air, wind and water impermeability values ​​brought by the Smart Slide system allow the sliding system to be easily applied even in high-rise buildings. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. Sliding system with the best performance value in the industry, with a water impermeability value of E1500 / 1500 Pa in EN standards, as determined by tests carried out in accredited test centers. The system allows multi-point locking. The system allows the use of glass up to 44 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. In the system with a case depth of 144 mm, the wing depth is 51 mm. System Depth (Case):155 mm System Depth (Sash):71.5 mm System Height (Case):71.5 mm System Height (Sash):104.5 mm System Height (Case + Wing):152 mm System Visible width (Stamp):117.5 mm Applicable Glass Thickness:32 mm Air Impermeability:A4 – 600 Pa / EN 12207 Water Tightness:E1500 – 1500 Pa / EN 12208 Wind Load Resistance:C5-B5 – 2000 Pa / EN 12210 Thermal Insulation:(Uf) < 1.4 W/m²K

It is an innovative facade system that is especially preferred in high-rise buildings, is manufactured entirely in a workshop environment and allows rapid assembly without scaffolding. USG 80 panel facade system, which has high performance values, is applied with a special design for the project. The system, in which all panel manufacturing, including glass, can be done in a workshop environment with high workmanship quality, is formed by hanging the produced panel modules on the facade, one by one, without installing scaffolding, especially in tower type buildings. The 3-row wick structure between the modules provides the system with a tolerance gap in seismic movements such as earthquakes and provides high performance. The covered, silicone and semi-covered appearance offered in standard facade systems is also offered in panel facade systems. All openings such as reverse transom, parallel and standard wing openings on the facade can be made with this system. System Visible Width:80 mm System Depth:85 – 155 mm Applicable Glass Thickness:6 – 34 mm Air Impermeability:A4 – 600 Pa / EN12152 Water Tightness:RE1500 – 1500 Pa / EN12154 Wind Load Resistance:2400 Pa / EN13116 Thermal Insulation:Ucw < 1.6 W/m2K

It will provide good solutions to realize your designs with its perfect carrier and mechanics in creating natural stone-looking facades.

Palace ALUFACE

In glass railing solutions, it holds the glass on the ground from multiple points with its reliable and healthy connections made of aluminum profile and offers decorative alternatives at the record level. It can be applied in glass thicknesses of 17.5 mm, 21.5 mm and 16 mm.

Palace ALUBORD

The ADD ON system, which allows the carrier profiles to be made of steel at points where the openings allowed by the aluminum horizontal and vertical carrier profiles in the facade systems are not sufficient for the projects, can offer more transparent surfaces to designers. It is a system that can be used in projects made with steel construction, which has more load-bearing properties, instead of deep aluminum profiles, in large spaces where large openings must be crossed at once, such as airports and auto showrooms. The system, where the system depth is shaped by steel and glass combinations used in the standard FS 50 system can also be used, is preferred by designers due to its high inertia values. The system consists of aluminum profiles with a wall thickness between 1.8 mm and 2.0 mm combined with steel profiles selected for the facade. System Visible Width:50 mm System Depth:Shaped by the steel to be used Applicable Glass Thickness:6 – 52 mm

It is a high-performance series that provides the desired openings in projects with its normal sliding and Lift&Slide mechanism options. High strength and performance are offered with 24 mm glass fiber reinforced polyamide barriers. Different types from 1 moving wing to 6 wings can be easily produced with frame profile alternatives such as monorail, 2-rail and 3-rail. With the application of steel rails and bearings, wings weighing up to 200 kg can be carried with the system. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. With its Eurogrove channel structure, it is compatible with different brands and types of opening accessories. It allows multi-point locking. The system allows the use of glass between 20 mm and 32 mm with profiles with wall thickness between 2.0 mm and 6.6 mm. In the system with a case depth of 110 mm, the wing depth is 43 mm. System Depth (Case):110 mm System Depth (Sash):43 mm System Height (Case):53 mm System Height (Sash):81 mm System Height (Case+Sash):127.9 mm System Visible Width (Stamp):85.8 mm Applicable Glass Thickness:20 mm - 32 mm Airtightness:A4 – 600 Pa / EN 12207 Water Tightness:8A – 450 Pa / EN 12208 Wind Load Resistance:C3-B3 – 1200 Pa / EN 12210 Thermal Insulation:(Uf) < 1.8 W/m²K

Uninsulated sliding is bad. There are two alternative size solutions: Small and Large tuba riding.

Wooden and aluminum door systems with molded aluminum frames can be applied depending on the desired wall thickness. SP 40 adjustable door and sill systems have an aesthetic appearance thanks to their oval lines. It has the possibility of application in the desired wall thickness with its wide profile range. Special fittings at profile joints enable meticulous corner details to be created at 45 degree joints. It responds to all architectural applications with its paintability in the desired color. It does not rust, does not rot and is environmentally friendly. Practical and easy to install.

It is a new generation facade system that offers all the necessary expansions for projects with Covered (K), Semi-Covered (V) and Silicone (S) alternatives. Unlike conventional 50 mm wide facade systems, its 60 mm size gives the system the ability to pass larger openings and make more glass area. It offers the opportunity to be used in all projects designed for different purposes with its horizontal and vertical carrier profiles at different depths. The system, which includes insulators of different sizes to achieve high thermal values, is an ideal solution for vertical facades as well as inclined surfaces and roof applications. The system allows the use of glass up to 52 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. System Visible Width:60 mm System Depth:80 – 205 mm Applicable Glass Thickness:6 – 52 mm Air Impermeability:A4 – 600 Pa / EN 12152 Water Tightness:RE750 – 750 Pa / EN 12154 Wind Load Resistance:1440 Pa / EN 13116 Thermal Insulation:(Uf) < 1.9 W/m²K

These are systems designed to achieve a transparent appearance on the facade, where the glass is connected to the carrier system (steel column-beam, glass or steel tension system) with special stainless glass holders. Glass can be applied as tempered laminated glass or tempered double glass. The joint gaps between the glasses can be insulated with UV resistant silicones.

SG 50K is a thermally insulated silicone facade system with a section depth of 50 mm. Vertical profiles with depths to meet different static values ​​are available in the system. Thanks to the condensate channel in the vertical profiles, facade water is easily discharged. In this system, air and water impermeability is maximized and application problems are eliminated. The hidden wing allows application with or without nails. Visible Internal Part:50 mm Visible External Part:16 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

SARAY COTTA, the latest product developed by SARAY R&D, offers architects an alternative material for facade cladding. Saray Cotta is a system consisting of 100% Aluminum profile. Its feature is that it can be produced in brick or wood appearance. It provides an aesthetic appearance on the facade with its horizontal and vertical joints. Saray Cotta has the opportunity to be produced in the desired size according to the architectural project and the condition of the facade, and provides great advantages in terms of workmanship, time and cost. Additionally, thanks to its low unit weight of 7 kg/m², it does not impose any additional load on the building. And with this feature, it provides a great advantage in terms of labor, time and cost compared to baked clay materials. Saray Cotta profiles produced with Qualicoat paint technology do not get dirty, do not fade, are safe against fire, long-lasting and environmentally friendly.

It has a section depth of 50 mm. It is possible to apply vertically without notching the horizontal profile. It has the feature of being easy to work and economical. It has few accessories, easy assembly and fast manufacturing features. A condensate channel system can be created without notching by using both notched and special accessories. It has the features of covered - silicone facade, horizontal covered - vertical silicone, vertical covered - horizontal silicone, outward opening transom wing (insulated, uninsulated) and openable wing. Visible Internal Part:50 mm Visible External Part:20 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

Saray A2 Mineral Dolgulu

A DECORATIVE AND FUNCTIONAL INDUSTRIAL DESIGNED PRODUCT,WHICH IS A NECCESITY IN ARCHITECTURE ART.IT IS A DIFFERENT INTERPRETATION ON THE ALUMINUM SLIDING SYSTEMS.IN ADDITION TO THE MODERN DESIGN CONCEPT,RADIAL STARTS AND FLAT FINISHES ARE APPLIED TO THE ALUMINUM PROFILE.

Otomatik giyotin cam sistemi; uzaktan kumandalı, motorlu, zincirli, hareketli küpeşte sistemidir. Sistem; hareketli küpeşte sistemi olarak; otel, cafe, restaurant, stadyum v.b mekanların kapatılıp, açılmasında yoğun bir şekilde tercih edilmektedir. Otomatik giyotin cam sistemlerinde, el-parmak sıkışmasını önleyen emniyet sistemi gibi patentli birçok yenilik sadece Vertiflex’de bulunmaktadır. Sistem, 8 mm – 10 mm veya ısıcam’lı olarak yapılabilmekte ve giyotin camlarda ulaşılabilen en yüksek yalıtıma ulaşmak için, kendine has, çözümler sunmaktadır.Sistem 4 dengeleyici tekere sahiptir. 4 metre yüksekliğe ve 4 metre genişliğe kadar maksimum 4 panelle uygulanabilir.SafeGuard panel bağlantı sistemi sayesinde, zincirin panellere bağlantısı sağlam bir şekilde yapılmaktadır. Zincirin, bağlantı yerlerinden kopması- ayrılması tamamen önlenmiştir.

GENİŞ PROFİL SEÇENEKLERİ İLE OPTİMUM ÇÖZÜMLER. ÜÇLÜ CAM VE JALUZİLİ CAM UYGULAYABİLME İMKANI

Dekoratif gizli aydınlatmalı alüminyum kol 3 Noktadan kilitlemeli Kilit 3mm alüminyum panel levha Temperli cam Güvenlikli barel rozeti Pivot menteşe

Paslanmaz 30×30 çekme kol (120’lik) 3 Noktadan kilitlemeli Kilit 3mm alüminyum panel levha 3’lü Güvenlik camı Güvenlikli barel rozeti 3’lü emniyet menteşesi

A CURTAIN WALL SYSTEM IS AN OUTER COVERING OF A BUILDING IN WHICH THE OUTER WALLS ARE NON-STRUCTURAL,BUT MORELY KEEP THE WEATHER OUT AND THE OCCUPANTS IN.AS THE CURTAIN WALL IS NON-STRUCTURAL IT CAN BE MADE OF A LIGHTWEIGHT MATERIAL.WHEN GLASS IS USED AS THE CURTAIN WALL,A GREAT ADVANTAGE IS THAT NATURAL LIGHT CAN PENETRATE DEEPER WITHIN THE BUILDING.